Motor clutch aging tester

The forward, reverse and stop times of the motor can be set separately. The aging times are automatically calculated and saved after power failure. The output voltage is adjustable from 3 to 6V. The maximum output current is 20A, and nearly 200 clutches can be aged at one time.

Smart lock handle torsion life testing machine

This machine is suitable for the lock handle pressure test, so that the latch bolt is separated from the buckle plate, and the fatigue life test is carried out by repeatedly pressing down.

High and low temperature test chamber

The high and low temperature test chamber is an accelerated wet and hot environment test for the whole door lock. Temperature range: -40℃~150℃ Temperature fluctuation: ±0.5℃ Temperature resolution: 0.01℃ Temperature uniformity: ±1.0℃ Normal heating time: from +20℃ to 150℃, less than 45 minutes, non-linear no-load. Normal cooling time: from +20℃ to -40℃, less than 55 minutes, non-linear no-load. Humidity range: 20%~98%RH Humidity fluctuation: ±1.0%RH Humidity resolution: ±1% Humidity uniformity: ±1.0%RH

UV Weathering Test Chamber

To simulate the damage caused by sunlight, rain and dew to materials, fluorescent ultraviolet (UV) lamps are used to simulate the effects of sunlight, and cold air is used to simulate moisture, rain and dew. The tested materials are placed in a cycle of alternating light and moisture at a certain temperature for testing. After several days or weeks of testing, the damage that occurs outdoors for months to years can be reproduced. Types of damage include: fading, discoloration, loss of gloss, chalking, cracking, turbidity, blistering, embrittlement, strength decline and oxidation.

Smart lock door opening and closing durability test machine

Test items: 1. Twist the lock 3. Lift the handle 4. Press the handle 5. Lift the slide cover 6. Press the slide cover 7. Press password, fingerprint (support optical and semiconductor fingerprint sensors), swipe card 8. Simulate door opening action, unlock 9. Simulate door closing action, lock Test working frequency (fingerprint, password, swipe card, mechanical key): 5-15 times/minute; Press password, press fingerprint, approach the card to output the corresponding action through the cylinder; Support life test maximum value: 250,000 times-500,000 times;

Lock core strength anti-drilling test machine

The lock detection equipment is optimized and designed to install the anti-drilling test of the lock head of the external door lock and the lock tongue of the mortise lock body. The test time is automatically controlled. After the power is turned on, the cylinder automatically reaches the preset pressure and automatically moves forward. When the preset time is reached, it automatically stops, realizing full automation in the test process.

Carton packaging drop tester

The drop tester simulates the situation when the product is dropped from different edges, angles and surfaces to the ground at different heights after packaging, so as to understand the damage of the product and evaluate the drop height and impact strength that the product packaging components can withstand when falling. In this way, the packaging design can be improved and perfected according to the actual situation of the product. This tester is specially designed to test the internal damage of various products caused by falling during handling or transportation after packaging.

Smart lock universal material testing machine

The testing machine is widely used in various hardware, lock bodies and other materials to test their tensile, bending, elongation, fracture, peeling, compression and other physical properties.

Door lock violent door slam tester

Carry out impact test on the lock body and lock tongue (after the lock body is installed normally, push the lock tongue out and hit the door frame under specified conditions); carry out door swing test on the smart lock (the smart lock is installed normally on the tooling, and a violent door swing test is carried out under specified conditions) to verify the reliability of the product structure.

Smart lock static tester

Test purpose: Mainly simulate the interference and damage of charged human body or objects to the equipment, and evaluate the ability of electronic equipment to resist electrostatic damage. Features are as follows: The electrostatic discharge generator is a tester that fully meets the requirements of IEC61000-4-2 standard. Its maximum electrostatic discharge voltage

Salt spray test chamber

The fog test standard is for the salt spray test conditions, such as temperature, humidity, sodium chloride solution concentration and pH, and also puts forward technical requirements for the performance of the salt spray test chamber. Which salt spray test standard is used for the same product depends on the characteristics of the salt spray test and the corrosion rate of the metal.

Motor clutch aging tester

The forward, reverse and stop times of the motor can be set separately. The aging times are automatically calculated and saved after power failure. The output voltage is adjustable from 3 to 6V. The maximum output current is 20A, and nearly 200 clutches can be aged at one time.

Smart lock handle torsion life testing machine

This machine is suitable for the lock handle pressure test, so that the latch bolt is separated from the buckle plate, and the fatigue life test is carried out by repeatedly pressing down.

High and low temperature test chamber

The high and low temperature test chamber is an accelerated wet and hot environment test for the whole door lock. Temperature range: -40℃~150℃ Temperature fluctuation: ±0.5℃ Temperature resolution: 0.01℃ Temperature uniformity: ±1.0℃ Normal heating time: from +20℃ to 150℃, less than 45 minutes, non-linear no-load. Normal cooling time: from +20℃ to -40℃, less than 55 minutes, non-linear no-load. Humidity range: 20%~98%RH Humidity fluctuation: ±1.0%RH Humidity resolution: ±1% Humidity uniformity: ±1.0%RH

UV Weathering Test Chamber

To simulate the damage caused by sunlight, rain and dew to materials, fluorescent ultraviolet (UV) lamps are used to simulate the effects of sunlight, and cold air is used to simulate moisture, rain and dew. The tested materials are placed in a cycle of alternating light and moisture at a certain temperature for testing. After several days or weeks of testing, the damage that occurs outdoors for months to years can be reproduced. Types of damage include: fading, discoloration, loss of gloss, chalking, cracking, turbidity, blistering, embrittlement, strength decline and oxidation.

Smart lock door opening and closing durability test machine

Test items: 1. Twist the lock 3. Lift the handle 4. Press the handle 5. Lift the slide cover 6. Press the slide cover 7. Press password, fingerprint (support optical and semiconductor fingerprint sensors), swipe card 8. Simulate door opening action, unlock 9. Simulate door closing action, lock Test working frequency (fingerprint, password, swipe card, mechanical key): 5-15 times/minute; Press password, press fingerprint, approach the card to output the corresponding action through the cylinder; Support life test maximum value: 250,000 times-500,000 times;

Lock core strength anti-drilling test machine

The lock detection equipment is optimized and designed to install the anti-drilling test of the lock head of the external door lock and the lock tongue of the mortise lock body. The test time is automatically controlled. After the power is turned on, the cylinder automatically reaches the preset pressure and automatically moves forward. When the preset time is reached, it automatically stops, realizing full automation in the test process.

Carton packaging drop tester

The drop tester simulates the situation when the product is dropped from different edges, angles and surfaces to the ground at different heights after packaging, so as to understand the damage of the product and evaluate the drop height and impact strength that the product packaging components can withstand when falling. In this way, the packaging design can be improved and perfected according to the actual situation of the product. This tester is specially designed to test the internal damage of various products caused by falling during handling or transportation after packaging.

Smart lock universal material testing machine

The testing machine is widely used in various hardware, lock bodies and other materials to test their tensile, bending, elongation, fracture, peeling, compression and other physical properties.

Door lock violent door slam tester

Carry out impact test on the lock body and lock tongue (after the lock body is installed normally, push the lock tongue out and hit the door frame under specified conditions); carry out door swing test on the smart lock (the smart lock is installed normally on the tooling, and a violent door swing test is carried out under specified conditions) to verify the reliability of the product structure.

Smart lock static tester

Test purpose: Mainly simulate the interference and damage of charged human body or objects to the equipment, and evaluate the ability of electronic equipment to resist electrostatic damage. Features are as follows: The electrostatic discharge generator is a tester that fully meets the requirements of IEC61000-4-2 standard. Its maximum electrostatic discharge voltage

Salt spray test chamber

The fog test standard is for the salt spray test conditions, such as temperature, humidity, sodium chloride solution concentration and pH, and also puts forward technical requirements for the performance of the salt spray test chamber. Which salt spray test standard is used for the same product depends on the characteristics of the salt spray test and the corrosion rate of the metal.

Motor clutch aging tester

The forward, reverse and stop times of the motor can be set separately. The aging times are automatically calculated and saved after power failure. The output voltage is adjustable from 3 to 6V. The maximum output current is 20A, and nearly 200 clutches can be aged at one time.

Smart lock handle torsion life testing machine

This machine is suitable for the lock handle pressure test, so that the latch bolt is separated from the buckle plate, and the fatigue life test is carried out by repeatedly pressing down.

High and low temperature test chamber

The high and low temperature test chamber is an accelerated wet and hot environment test for the whole door lock. Temperature range: -40℃~150℃ Temperature fluctuation: ±0.5℃ Temperature resolution: 0.01℃ Temperature uniformity: ±1.0℃ Normal heating time: from +20℃ to 150℃, less than 45 minutes, non-linear no-load. Normal cooling time: from +20℃ to -40℃, less than 55 minutes, non-linear no-load. Humidity range: 20%~98%RH Humidity fluctuation: ±1.0%RH Humidity resolution: ±1% Humidity uniformity: ±1.0%RH

UV Weathering Test Chamber

To simulate the damage caused by sunlight, rain and dew to materials, fluorescent ultraviolet (UV) lamps are used to simulate the effects of sunlight, and cold air is used to simulate moisture, rain and dew. The tested materials are placed in a cycle of alternating light and moisture at a certain temperature for testing. After several days or weeks of testing, the damage that occurs outdoors for months to years can be reproduced. Types of damage include: fading, discoloration, loss of gloss, chalking, cracking, turbidity, blistering, embrittlement, strength decline and oxidation.

Smart lock door opening and closing durability test machine

Test items: 1. Twist the lock 3. Lift the handle 4. Press the handle 5. Lift the slide cover 6. Press the slide cover 7. Press password, fingerprint (support optical and semiconductor fingerprint sensors), swipe card 8. Simulate door opening action, unlock 9. Simulate door closing action, lock Test working frequency (fingerprint, password, swipe card, mechanical key): 5-15 times/minute; Press password, press fingerprint, approach the card to output the corresponding action through the cylinder; Support life test maximum value: 250,000 times-500,000 times;

Lock core strength anti-drilling test machine

The lock detection equipment is optimized and designed to install the anti-drilling test of the lock head of the external door lock and the lock tongue of the mortise lock body. The test time is automatically controlled. After the power is turned on, the cylinder automatically reaches the preset pressure and automatically moves forward. When the preset time is reached, it automatically stops, realizing full automation in the test process.

Carton packaging drop tester

The drop tester simulates the situation when the product is dropped from different edges, angles and surfaces to the ground at different heights after packaging, so as to understand the damage of the product and evaluate the drop height and impact strength that the product packaging components can withstand when falling. In this way, the packaging design can be improved and perfected according to the actual situation of the product. This tester is specially designed to test the internal damage of various products caused by falling during handling or transportation after packaging.

Smart lock universal material testing machine

The testing machine is widely used in various hardware, lock bodies and other materials to test their tensile, bending, elongation, fracture, peeling, compression and other physical properties.

Door lock violent door slam tester

Carry out impact test on the lock body and lock tongue (after the lock body is installed normally, push the lock tongue out and hit the door frame under specified conditions); carry out door swing test on the smart lock (the smart lock is installed normally on the tooling, and a violent door swing test is carried out under specified conditions) to verify the reliability of the product structure.

Smart lock static tester

Test purpose: Mainly simulate the interference and damage of charged human body or objects to the equipment, and evaluate the ability of electronic equipment to resist electrostatic damage. Features are as follows: The electrostatic discharge generator is a tester that fully meets the requirements of IEC61000-4-2 standard. Its maximum electrostatic discharge voltage

Salt spray test chamber

The fog test standard is for the salt spray test conditions, such as temperature, humidity, sodium chloride solution concentration and pH, and also puts forward technical requirements for the performance of the salt spray test chamber. Which salt spray test standard is used for the same product depends on the characteristics of the salt spray test and the corrosion rate of the metal.